Windhager BioWIN 2 Touch Montageanleitung Seite 23

2. Installation sequence
Fig. 40 Fit the ash box base
Fig. 42 Close the bracket fastener
Only for BioWIN 2 Touch Klassik-L:
– Fasten the cover at the front with 2 screws – Fig. 44.
2 x
Fig. 44 Fasten the cover
For further installation steps, refer to the „BioWIN 2 Touch Installation Instructions", and for
external combustion air to the „Adapter for external combustion air supply BIO 060".
Fig. 41 Insert the ash box at a slight le angle and
push in the handle as far as possible
Fig. 43 Adjust the set screw
23
EN