Remote Control; Switching The Unit On/Off - Webasto Belaire H2000 Bedienungsanleitung

5.5

Remote control

8
7
6
5
19 °C/°F
18
17
16
DISPLAY TIMER
15
14
SET TIME
HOUR/MIN
Fig. 21: Remote control overview
5.6

Switching the unit ON/OFF

OFF
Fig. 22: Switching the unit ON
ON
Fig. 23: Switching the unit OFF
Cool Top Trail 20/24
Display symbols:
1. Mode display
COOL/FAN/DRY/HEAT/AUTO
1
2. Fan speed display
2
Low/Medium/High/Auto
3. Lock function display
4. Sleep function display
3
5. Timer ON/OFF status indicator
4
6. Clock/Timer display
Real time clock, Time of timer
9
LOCK
during setup.
7. Temperature display
10
MODE
Shows the set point tempera-
ture or the indoor temperature.
Units in °C or °F.
11
FAN
8. Data Transmission
Symbols shows up briefly when
the remote control transmits
12
SLEEP
data to the A/C unit.
Operation keys:
9. LOCK key
13
Disables the touch control on
the air distributor when the
unit is ON. Press the key again
to unlock.
10. MODE key
Selects the operation mode
COOL/DRY/FAN/HEAT/AUTO.
11. FAN key
Selects Low/Medium/High or
AUTO fan speed. AUTO fan
speed is only possible in COOL/
HEAT mode.
Press the
X
tioner.
– The unit switches on and the display of the air distributor
ON
– The display of the remote control shows the set tempera-
– The previous settings are taken over.
– The indoor fan may start immediately if the unit is in fan
– It may take up to 3 min. for the compressor to start opera-
To switch the unit off, press the
X
– The unit switches off, the display of the air distributor
– The display of the remote control shows only the clock.
OFF
key on the remote control to start the air condi-
shows the set temperature and operation mode.
ture, operation mode and fan speed level.
or cool mode. If in heating mode there will be a delay
while the inside coil heats up before the inside fan turns
on - preventing a cold draft.
tion. This is a feature to protect the compressor.
blanks.
With AUTO fan speed the fan
automatically adjusts between
Low, Medium and High.
12. Selects the sleep mode.
Only available in COOL or
HEAT mode.
13. SET TIME key
Enters CLOCK/TIMER
setting mode.
14. HOUR/MIN key
Changes between hour
or minutes settings.
15. TIMER key
Activates different timer
settings.
16. DISPLAY key
Switches the display of
the air distributor On/Off.
17. Up/Down keys
Adjusts the set point
temperature, clock or
timer.
18. ON/OFF key
Switches the system On/
Off.
19. °C/°F key
Selects the temperature
units, Celcius or Fahren-
heit, of the temperature
display.
key again
13