Disposal; Technical Specifications; Wiring Schematic; Ce-Declarations - Webasto Belaire H2000 Bedienungsanleitung

NOTE
Before contacting Webasto for technical support please collect the following information:
■ Are any error codes displayed?
■ Is the display of the air distributor in normal operation or not? Does it display a temperature from
16 to 30°C?
■ Can you adjust the set point temperature when in cool or heat mode?
■ Is there a "0" shown in the display?
■ Is the display showing a jumbled display?
■ When in fan mode is there any air flow from the air distributor outlets?
■ Can you hear the compressor starting or stopping in heating or cooling mode?
Your help in collecting this information will greatly assist the service team in correcting any problems
– Thank you
8

Disposal

Dispose of packaging material as required by standing regulations, separating them for recycling.
The system cannot be disposed off as regular waste.
Dispose the system according the local applicable rules and regulations. Obtain information about
disposal at the city council, the responsible waste station and/or your local Webasto sales partner.
9

Technical Specifications

Parameter
Product name
Manufacturer model name Belaire
Power supply
Rated cooling capacity
Rated heating capacity
Input power for cooling
Input power for heating
Rated current for cooling
Rated current for heating 2.6 A
Maximum input power
Maximum current
Operation at ambient
temperatures
NOTE
All parameters listed are subject to change without notice and the specifications shown on unit data
plates shall prevail. All values are approximate and subject to change.

10 Wiring schematic

See the „Annex"on page 153. Legend for the Cool Top Trail 20 / 24 wiring schematic:
Item Description
1 Control panel
2 Room sensor
3 Outdoor heat exchanger sensor
4 Indoor heat exchanger sensor
5 Compressor
6 Fuse 5x20mm, 250V, T5AL or T5AH
4WV 4 Way reversing valve

11 CE-Declarations

See the „Annex" on page 154 and 155.
Cool Top Trail 20/24
CTT 20 CTT 24
Cool Top Trail 20/24 Cooling possible at ambient
temperatures
Maximum design pressure
H2000/H2400
220-240 V/50 Hz Minimum design pressure
2000 W 2400 W Maximum air flow
2000 W 2400 W Weight outdoor unit
700 W 950 W Weight indoor unit
600 W 850 W Refrigerant charged
3.0 A 4.2 A Global Warming Potential
(GWP)
3.8 A CO2 equivalent
800 W 1040 W Maximum vehicle inclination
angle during operation
3.5 A 4.5 A Dimensions
-5 °C to +50 °C
Item Description
ID
IF
OD OutDoor (sensor)
ODF OutDoor Fan
OF
HF
MF Medium
Parameter
InDoor (sensor)
Indoor Fan
Outdoor Fan
High
CTT 20 CTT 24
16 °C to 50 °C
2900 kPa
1840 kPa
310 m /h
3
net 28 kg net 29 kg
net 2.8 kg
R407C/470 g R407C/450 g
1774
834 kg 798 kg
5° (=8,8%)
See Fig. 03 and Fig. 04
Wiring code Wiring Colour
BN Brown
BU Blue
GNYE Green-Yellow
RD Red
YE Yellow
20