Siemens BOP-2 Commissioning Seite 8

Editing parameters (scrolling)
1. Using the or
number.
2. Press to select the parameter.
3. The parameter value will start flashing.
4. Using the or
5. Press to accept the modified value.
6. The parameter number will start flashing.
7. Using the and
numbers to modify another parameter.
or
8. Press to return to the previous screen.
or
9. A long press of
Notes:
Pressing once during single digit entry with restart the single

digit entry. That is, if you are on the fifth digit and press
it will return you to first digit.
Pressing twice during single digit entry will exit the single digit

entry mode.
Both method of editing, that is, scrolling or single digit entry can

be used to edit any value displayed such as parameters, indexes
and setup values.
8
keys to scroll to the required parameter
keys to change the parameter value.
keys scroll through the parameter
to return to the top of the Monitor menu.
MONITORING MONITORING
PARAMETER PARAMETER
MONITORING MONITORING
PARAMETER PARAMETER
MONITORING MONITORING
PARAMETER PARAMETER
MONITORING MONITORING
then
PARAMETER PARAMETER
MONITORING MONITORING
PARAMETER PARAMETER
BOP-2, Getting Started Guide 03/10 A5E02826349A
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
P 327
90. 0
SETUP SETUP EXTRAS EXTRAS
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
P 327
90. 0
SETUP SETUP EXTRAS EXTRAS
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
P 327
65. 1
SETUP SETUP EXTRAS EXTRAS
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
P 327
65. 1
SETUP SETUP EXTRAS EXTRAS
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
MONITOR
SETUP SETUP EXTRAS EXTRAS