Siemens BOP-2 Commissioning Seite 4

Locking and unlocking the keypad
To lock the BOP-2 keypad press
keypad press and
Screen icons
The BOP-2 displays a number of icons at the left-hand side of the display to indicate the actual state
of the Inverter. These icons are explained in the table below.
Function
Command source
Inverter status
Jog
Fault/alarm
4
and
simultaneously for 3 seconds or more.
Status
Hand
Inverter and motor running
Jog function is active
Fault or alarm pending
Flashing symbol = Fault
Steady symbol = Warning
simultaneously for 3 seconds or more. To unlock the
Icon Remarks
When the HAND mode is active the
icon is displayed. When AUTO mode is
active, no icon is displayed.
This is a static icon and does not rotate.
If a fault is detected, the Inverter will be
stopped and the user is required to take
the necessary corrective actions to
clear the fault. An alarm is a condition
that will not stop the Inverter, for
example, overtemperature.
BOP-2, Getting Started Guide 03/10 A5E02826349A