Performance Specifications - NSK Ti-Max X500L Bedienungsanleitung

Caution
• Do not operate the handpiece without first inserting a bur or test-bur into the chuck.
• Remove the bur only after the handpiece has completely stopped rotating.
• Do not look into LED light directly.
• When abnormalities are in LED (dark, do not light on or flashing or so), contact dealer to repair.
(X500WLED/X500BLED/M600WLED/M600BLED/X700WLED/X700BLED)
• This product is classified as Class 1 LED Product. (X500WLED/X500BLED/X600WLED/X600BLED/X700WLED/X700BLED)
• Use a power source which meets the following requirements.
(X500WLED/X500BLED/X600WLED/X600BLED/X700WLED/X700BLED)
1.The electricity supply of the power source is below 15W both under normal and single failure conditions.
2.The power source uses a SELV circuit for electricity supply.
3.The output voltage of the power source is within the range recommended by the manufacturer of this product.
2
Performance specifications
X500L X500
Model
Head Type
Miniature Head
Rotation Speed 390,000 ~ 450,000min
-1
Drive Air Pressure
Chuck Type
Burs
Friction Grip Short Shank
—
Optics Cellular Glass Rod
Head Size ø10.3 x 11.7 mm
Diameter x Height
X600L X650L X600 X700L
Standard Head Torque Head
380,000 ~ 440,000min 300,000 ~ 360,000min
-1
0.25MPa (2.5kgf/cm ) ~0.3MPa (3.0kgf/cm )
2 2
Push Button Chuck
Size: ISO1797-1 Type3 ø1.59~1.60
Friction Grip Standard Shank
—
Cellular Glass Rod Cellular Glass Rod
ø11.2 x 13.6 mm ø13.2 x 13.6 mm
X700
-1
—
3