RTW 10500X-PLUS Bedienungsanleitung Seite 162

RTW DigitalMonitor 10500X-PLUS
4. Use Up or Dwn key to access all available display modes for Multi Instru-
ment 1. On each selection use the Sel (SELECT) key to switch this display
mode On or Off. All modes switched to On will be available for the Toggle
function.
5. Press the Quit key to leave the menu and save the configuration change with
the Press SEL to SAVE option before returning to the normal display mode.
6. Repeatedly press the MODE/SET button for which the Toggle setup was
changed to cycle through all available display modes.
E 3 Quick Start • E 3.8 Defining Toggle Options for Multi Instrument 1 162