Herunterladen Inhalt Inhalt Diese Seite drucken

Assembling The Sausage Stuff Er Attachment - Silvercrest SFW 350 C2 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SFW 350 C2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
WARNING! RISK OF INJURY!
The cross blade w is very sharp! Risk of injury!
CAUTION - PROPERTY DAMAGE!
The appliance will be damaged if the cross blade w is inserted the other
way around!
4) Select the appropriate cutting disc e/sausage disc z.
5) Place your selected cutting disc e into the meat grinder casing 5 so that
the fi xings on the cutting disc e are located in the openings in the meat
grinder casing 5.
6) After everything has been correctly assembled, screw the ring clamp r
back on hand-tight.
7) The ready-assembled meat grinder casing 5 is connected by a bayonet
connector to the motor unit 4:
Insert the meat grinder casing 5 into the motor unit 4 such that the
arrow on the meat grinder casing 5 lies against the symbol
motor unit 4. The locking button i presses itself in (Fig. B).
Lightly press the meat grinder casing 5 in and at the same time turn
the feeding shaft on the meat grinder casing 5 into the middle position
(Fig. B) so that the arrow on the feeding shaft points to the symbol
When the meat grinder casing 5 engages, the locking button i
springs out.
Finally, place the feeding tray 3 on top of the feeding funnel.
To dismantle it, press the locking button i and turn the feeding funnel
to the right (Fig. B)
Assembling the sausage stuff er attachment
Unfold the fold-out side - there you will fi nd the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing 5 as described under "Assembling the
meat grinder".
2) Dismantle all parts which are fi tted to/in the meat grinder casing 5 and
clean them.
3) Coat all metal parts with cooking oil.
4) Put the transport screw 0, the spring q and the cross blade w back into
the meat grinder casing 5.
5) Insert the sausage disc z so that the fi xings on the sausage disc z are
located in the openings in the meat grinder casing 5.
6) Then place the sausage stuff er attachment t before the sausage disc z.
SFW 350 C2
. You can now pull the meat grinder casing 5 out.
on the
.
GB │ IE
 27

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis