En - Quick Start-Up Guide; Before You Start; Start-Up With The First Start Assistant On An Hvac Control Panel - ABB ACH580-01 Kurzanleitung Für Die Installation

EN – Quick start-up guide
This guide describes how to start-up the drive using the First start assistant on the
HVAC control panel. For complete information on start-up, see ACH580 firmware
manual (3AXD50000027537 [English]).

Before you start

Ensure that the drive has been installed as described in chapter
installation guide on page
page 173 (frame R5).
Start-up with the First start assistant on an HVAC control
panel
Make sure that the installation work is complete. Make sure that cover of the drive and the
cable box, if included, are on place.
Check that the starting of the motor does not cause any danger. De-couple the
driven machine if there is a risk of damage in case of an incorrect direction of
rotation.
Hints on using the assistant control panel
The two commands at the bottom of the display
(Options and Menu in the figure on the right),
show the functions of the two softkeys
located below the display. The commands
assigned to the softkeys vary depending on the
context.
Use keys , ,
and/or change values depending on the active
view.
?
Key shows a context-sensitive help page.
1 – First start assistant guided settings:
Language, motor nominal values, and date and time
Have the motor name plate data at hand.
Power up the drive.
23 (frames R0...R4) or
Safety
and
and to move the cursor
EN – Quick start-up guide 321
EN – R0...R4 Quick
EN – R5 Quick installation guide
R0-
R4
R0-
R9
on
EN
DA
DE
ES
FI
FR
IT
NL
PL
PT
RU
SV
TR
ZH