Grille And Drip Basin; Bodywork - La Cimbali M39 Dosatron TE Gebrauch Und Installation

STEAM AND HOT WATER DISPENSING PIPES - This operation must be made at the end of each working day
Using a clean sponge, wash with hot water removing any
organic residue present. Rinse carefully.
To clean the inside of the steam nozzles, follow these steps:
Turn the nozzle towards the cup tray and carefully activate
steam dispensing at least once.
NOTE: the procedures described below can also be carried out when the machine is switched off.
This operation must be made at the end of each working day
1. Remove the grille from the basin.
2. Extract the basin.
3. Rinse the grid and tray under running water.
Danger of burns
DO NOT insert your hands beneath the front
panel.
DISCHARGE BASIN - This operation must be made at the end of each working day
1. After removing the tray, remove
the lid to the draining tray.
2. Remove any residues with a
sponge and rinse well with cold
water.
3. Pour about a liter of hot water into
the discharge basin to remove any
discharge residues.
BODYWORK - This operation must be made at the end of each working day
Use a soft cloth and cleaning products WITHOUT ammonia
or abrasives, removing any organic residue present in the
work area.
Note. Do not spray liquids into the panel slots.

GRILLE AND DRIP BASIN

1
1
27 EN
2 3
2