Service Time Menu; Date And Time - La Cimbali M39 Dosatron TE Gebrauch Und Installation

Pressing the "PRG" key (29), the following message
will appear on the display:
SERVICE TIME

DATE AND TIME

ON time
OFF time
Day off
Energy Saving
- ON time (time the machine switches on);
- OFF time (time the machine switches off);
- day off (day on which the enterprise is closed);
- Energy Saving (enable/disable the Energy Saving
function: YES/NO);
- Night ON (start time for evening beverage price: only
when payment system is connected);
- Night OFF (end time for evening beverage price: only
when payment system is connected);
- Wash 1 (request - every 24 hrs - at the programmed
hour; cannot be disabled);
- Wash 2 ÷ 5 (hour of scheduled washes from 2 to 5)
General indications
If there is no day off (i.e. the enterprise never closes), enter
"none" for the "day off" item.
Enter the same time for the "ON time" and "OFF time"
parameters (for example:
ON time 22:00
OFF time 22:00)
if the automatic switch on/switch off function is not required
and you wish to manually switch the machine on and off.
To modify the date and hour, press the
(29) on the corresponding line. The following message
will appear:
DATE AND TIME
Year
Month
Date
Hour
Minutes

Service time menu

+
03:00
03:00
none
YES
Date and time
"PRG" key
+
11
09 SEP
21 WED
17
12
17 EN
"WASH 1" AND "WASHES 2 ÷ 5"
Washing cycles can be performed at pre-set times. At the
set time, the display will show: this message "EXECUTE
COFFEE WASHING".
When requested, a washing cycle (simultaneous or
sequential) will be performed as described in the "Cleaning
Operations" paragraph.
Follow these steps to set the time for the washing cycle:
-
- Press the "PRG" key (29);
- Change the time, using the
keys;
- Press the "RES" (24)
Repeat the steps previously indicated to modify the washing
times.
NOTES
Wash 1: wash 1 cannot be disabled. It is requested daily
at the programmed hour, and always within 24 hours.
Washes 2 ÷ 5 : if the set hour for these wash cycles
occurs when the machine is switched off, the request will
be canceled.
Set OFF against the time so as to not activate these wash
cycles.
OFF is displayed press the
time is "00:00".
For more details, please consult the technical manual at
Use the "+" (30) and
"PRG" key (29). The cursor will turn into an arrow è and it
becomes possible to change the number for the selected
entry by using the "+" (30) and
Once the operation is completed, press the
(24
Note: the cursor changes back to black line.
Repeat the operation described above to modify
other parameters.
WASH...);
"+" (30) and "-" (31)
"-" (31) key the indicated
"-" (31) keys to move the cursor
"-" (31) keys.
"RES" key
.