Operating With The Whisk (6) - Silvercrest SSSH 600 A1 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SSSH 600 A1
To prevent injuries caused by the rotating blade, only switch the hand-held blender on once the immersion
blender (5) is immersed in the mixture.
Proceed as follows:

Pour the food to be processed into a suitable container or pan.

Vertically guide the immersion blender (5) into the mixture.

Depending on requirements, start the hand-held blender with the switch (2) and select a suitable speed
with the speed controller (1). If you wish to use the maximum speed straight away, you can start the
hand-held mixer with the TURBO switch (3). Press and hold the desired button during the mixing or
blending process. If the immersion blender (5) sticks to the base of the container, briefly release the
button and then continue with the mixing process.

To achieve consistent processing of the mixture, gently move the hand-held blender up and down
during blending.

Once the mixing result meets your requirements, release the switch (2) or TURBO switch (3) as long as
the immersion blender (5) is still in the mixture.

Wait until the blade has stopped before you remove the immersion blender (5) out of the blended food.
If you notice any unusual noises during
operation, such as squeaking or similar
noises, apply a little flavourless cooking oil
to the drive shaft of the immersion blender
(5). Please refer to the illustration opposite
when doing so.

7.2 Operating with the whisk (6)

To prevent liquids from spraying during mixing, use the whisk (6) at max. speed level '5' and
never press the TURBO switch (3).
Place the liquid to be processed in the measuring cup provided (fill with a maximum of 300 ml) or another
narrow, high-sided container with a flat base. This is the ideal requirement for great processing.
To prevent injuries caused by the rotating whisk (6), only switch the hand-held blender on once the whisk
(6) is immersed in the mixture.
28 - English