AsViva C16 Benutzerhandbuch Seite 42

ASSEMBLY
Step 3
1. Attach the bottom left handlebar (14) to the left side axle of the front support (13). Secure it by
using one D type washer (36), one flat washer (35), one spring washer (34) and one hex head bolt
(33). Attach the cap (32) onto the hex head bolt (33).
2. Slide the sleeve (40) through the left pedal tube and the bottom left handlebar. Attach the left pedal
tube (11) to the lower left handlebar (14). Secure using one hex head bolt (39), one flat washer
(41) and one nylon locknut (42). Attach two caps (32) onto the hex head bolt (39) and locknut (42).
3. Attach the left pedal tube (11) to the left crank arm (49). Secure it by using one hinge bolt (45L),
one wave washer (46), one flat washer (47) and one nylon locknut (48L).
4. Repeat for the lower right handlebar (15).
Note:
The left hinge bolt need to be threaded in counter-clockwise direction and the right hinge bolt needs to
be threaded in a clockwise direction.
42