Tylo SENSE SPORT Installationsanleitung Seite 8

6
17. Hang the heater on the brackets by sliding it straight in to-
wards the wall (see Figure 16, Page 6). It can be neces-
sary to slacken the bracket screws a little. Tighten them again
when the heater is hung up.
Figure 16: Sliding the heater on
18. Use the countersunk lock screw to prevent the heater being
lifted off the wall (see Figure 17, Page 6).
Figure 17: Lock screw
Unusual voltages/number of phases
Before connecting to voltages or numbers of phases not listed in
the wiring diagram Figure 18, Page 7, contact Tylö Customer
Service.