Sampling Equipment - sewerin EX-TEC-Combi-P3 Betriebsanleitung

COMPLETE RECHARGING
After more than 8 hours operation, a complete recharging is
necessary. Press key "Laden" (german for charge) a red lamp will
light up and the yellow one goes out. A 14 hours recharging period
is thus started. After elapse of this period, the recharger switches
automatically to buffering
The 14 hour charging time will not be interrupted when the detector
is taken out of its receptable. It can only be cancelled by pressing
the key "Puffern". When pressing the key "Laden" a new 14 hours´
charging process will be initiated.
In order to ensure a correct charging, the recharger needs a
constant current supply with the least possible interruptions.
Recharging of the detector must only be
carried out outside hazardous areas!
4.2

Sampling equipment

HAND SEARCH PROBE,
FLOAT SEARCH PROBE
for sampling out of man holes, pits or shafts, where water may
accumulate
SUCTION HOSE
2 m long / 6 m long with instantaneous couplings for the connection
of detector and hand search probe
HYDROPHOBIC FILTER
as spares
43