Installation; Transport - Reflex Storatherm Aqua Load Serie Betriebsanleitung

5

Installation

WARNING
Risk of injury due to heavy weight
The tanks are heavy. Consequently, there is a risk of physical injury and accidents.
– Use suitable lifting equipment for transportation and installation.
CAUTION
Risk of burns
Escaping hot medium can cause burns.
• Maintain a sufficient distance from the escaping medium.
• Wear suitable personal protective equipment (safety gloves and goggles).
5.1

Transport

CAUTION
- Device damage. Only use the devices provided for siting and transport.
ATTENTION
Property damage during transport
Improper transporting procedures may cause damage.
• Fasten the device with suitable transport securing means such as straps.
For transport to the installation location proceed as follows:
1. Observe the marking on the packaging.
2. Move the cylinder carefully during transport to the installation location.
3. Set the cylinder down gently.
4. Only remove the packaging at the place of installation
5. After transport, check the cylinder for transport damage
Storatherm — 25.07.2018
Installation
English — 9