Description; Identification; Regulations - Reflex Storatherm Aqua Load Serie Betriebsanleitung

3

Description

The indirectly or externally heated DHW cylinder, referred to below as a cylinder, is used for storing
domestic hot water. It primarily comprises a metal storage vessel. The outer wall of the storage vessel
is provided with permanently attached insulation to prevent heat loss. The inner wall of the storage
vessel is enamelled according to DIN 4753-3. This coating is neutral in respect of conventional
installation materials and domestic hot water.
3.1

Identification

The nameplate provides information on manufacturer, year of manufacture, part number and
technical data. The nameplate is attached to the tank.
3.2

Regulations

Concerning the installation and operation of the device, the following standards, regulations and
directives have to be complied with:
• DIN EN 806
• DIN EN 1717: 2011-08
• DIN 1988
• DIN 4708
• EN 12975
• pr EN 12897: 2014
• DVGW
– Worksheet W 551
– Worksheet W 553
• EnEG (German energy saving act)
• EnEV (German ordinance on energy-saving thermal protection and energy-saving plant
technology for buildings)
• 2009/125/EC (Ecodesign Directive)
• Ordinance (EU) No. 814/2013 (implementing measures)
• Local regulations
• VDE regulations
Storatherm — 25.07.2018
Description
English — 5