OPERATING THE REFRIGERATOR
Setting the storage temperature in the fresh food compartment
When switched on for the fi rst time, all LEDs on the display will light up for 3 seconds, then only the LED
indicating the set cooling level will remain lit.
Display indication
In the event of a breakdown, the failure code is repeatedly indicated on the display by the corresponding LED.
During normal trouble free operation, the lit LED indicates the set cooling temperature.
Cooling temperature setting
GB
Each time you press the cooling level button, the setting changes cyclically to the next level. The refrigerator
starts to cool to the set temperature 15 seconds after the setting is done.
Level 1
Quick cooling function
Set the quick cooling mode.
The quick cooling Indicator lights up and cools the refrigerator to 2°C. After 150 minutes, the quick cooling
function automatically turns off . You can turn off the quick cooling function earlier by setting a diff erent
cooling temperature.
Freezer temperature control
During normal operation we recommend to set the cooling in
the freezer to NORMAL. In the COLD position the temperature is
unnecessarily low, but in the COLDER setting the cooling may not be suffi cient.
At summer temperatures, if the room temperature reaches 35 ° C or more, set
the controller to COLD.
If the refrigerator is placed in unheated rooms in winter, if the room temperature
drops below 10°C, it is recommended to set the freezer cooling to COLDER.
Sounds during operation
The refrigerator can emit various sounds during operation, produced by the motor with compressor and the
circulating refrigerant. This is not a malfunction.
Accessories
Freezer – box
•
The box is used to store foods to which
you need easy access.
Box removal
•
Slide the box out as far as it will go.
•
Lift and slide the front part of the box.
Perform the procedure in reverse when
resetting.
52
Level 2
Level 2
Freezer – box
Level 4
Level 5