ECG ERB 21880 NXA++ Bedienungsanleitung Seite 50

9) Install the refrigerator top door and mount the
top hingeplate on the left side of the refrigerator.
GB
Before using the refrigerator
• Allow the freezer to stand for 3 hours before connecting it for the fi rst time or after transporting it.
Otherwise, the compressor may be damaged.
• Your refrigerator may smell at the fi rst start; odour disappears as soon as cooling starts.
Information about the new cooling technology
Refrigerators-freezers with new refrigeration technology are equipped with a system diff erent from static
refrigerators-freezers. In the case of ordinary refrigerators-freezers, humid air is blown into the freezer and
the water evaporating from the food becomes ice in the freezer compartment. In order to remove this frost, in
other words, to defrost, the refrigerator must be disconnected from the power supply. During defrosting, the
user must put food away and remove the remaining ice and accumulated frost.
In the case of freezers equipped with new cooling technology, the situation is quite diff erent. Cool and dry air
is dispersed in the freezer compartment by the fan. The cold air is this way easily dispersed throughout the
space – even in places between the shelves and the food is frozen properly and evenly. And no frost forms.
The confi guration in the refrigerator compartment will be almost the same as in the freezer compartment. The
air dispersed by the fan in the top of the refrigerator compartment is cooled during passage through the gap
behind the vent. To complete the cooling process in the refrigerator compartment, air is released at the same
time through the openings on the vent. The openings on the vent are designed to distribute the air evenly in
the space.
Since no air passes through the refrigerator and freezer, the smells do not mix.
This makes the refrigerator with the new cooling technology easy to use and off ers you both large volume and
aesthetic appearance.
50
10) Install the hinge cover.