Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Display and control panel
Internal display/internal controls
GB
1.
Allows you to adjust the freezer compartment.
2.
Allows you to set the refrigerator compartment.
3.
Display for setting the value of the freezer compartment.
4.
Display for setting the value of the refrigerator compartment.
5.
Symbol of the Eco regime.
6.
Fast freezing symbol.
7.
Alarm symbol.
Lighting (if available)
When the product is first connected to the mains, the interior lighting may be delayed by 1 minute due to
opening tests.
OPERATING THE REFRIGERATOR
Operating the freezer compartment of your refrigerator
When the appliance is connected to the mains, all symbols will be displayed within 2 seconds, the freezer
compartment setup display shows a default value of -18 °C and the cooling compartment setup display shows
a default value of +4 °C.
Setting the temperature in the freezer part
•
The initial temperature of the freezer compartment is set to -18 °C.
•
Press the Freezer Adjustment button once.
When the button is pressed for the first time, the previous value flashes on the display.
•
Each time the same button is pressed, a lower temperature is set (-16 °C, -18 °C, -20 °C, -22 °C or -24 °C).
•
If you press this button again, the temperature setting returns to -16 °C.
NOTE: The Eco mode is activated automatically when the freezer compartment temperature is set
to -18 °C.
Cooling temperature setting
•
The initial temperature of the cooling compartment is set to +4 °C.
•
Press the Refrigerator Adjustment button once.
•
Each time the same button is pressed, a lower temperature is set (+8 °C, + 6 °C, +5 °C, +4 °C or +2 °C).
•
If you press this button again, the temperature setting returns to +8 °C.
52
3
5
6
1
7
4
2
Werbung
Inhaltsverzeichnis
