Automatic Switch To Idle Interval Setting (Time Out); Self-Test Check Valve And Ventilators Setting - Bosch RTM 430 Instandsetzungsanweisung

6.2.10 Automatic switch to idle
interval setting (time out)
6.2.11 Self-test check valve and
ventilators setting
68
This menu allows you to preselect the time after which the RTM automatically switches
to standby, i.e. you set the time after which the unit switches to standby if no data
exchange between the RTM 430 and the emission system analyzer or emission analysis
module occurs during the set time (timeout).
This menu allows you to preselect whether the valve and the ventilators are also to be
checked during the self test. Normally, the valves and the ventilators are always also
checked.