34
5.
Installation
5.1
Mains supply
-
Attention 230V mains voltage! Installation and commissioning may only be carried out by a skilled
electrician in compliance with the German electrical standards (VDE) and safety provisions.
-
The energy supply system for the Doorguard hardwired version must be equipped with a circuit breaker in
accordance with the intended purpose (circuit breaker or plug positioned at the connecting cable to the
supply circuit).
-
The mains supply wires must have double insulation and must be fixed
to the housing base using a cable binder (see diagram). The enclosed
insulating tube can be used for this purpose.
-
Switch off the supply voltage, before opening the housing and/or working
on the device.
5.2
Wiring diagram
Mounting and Operating Instructions Doorguard hardwired version