Docking Station; Power Supply Unit; Interfaces - ACD GRUPPE M260SE Set Kurzübersicht

15.2 Docking station

15.2.1 Power supply unit

The M260SE and the spare battery may only be charged in the DS260 docking station with the
corresponding power supply unit.

External power supply unit for DS260
o Input voltage
o Output voltage

Power cable (country-specific)

15.2.2 Interfaces

The DS260 docking station interfaces are described below. They are located at the rear.
Fig. 11: DS260 interfaces
The connections are described from left to right:

The DC plug of the power supply unit is inserted into the DC port to supply power.

The USB port (type B) is assigned according to the USB standard. A conventional USB cable can be
connected to the port.

The USB port (type A) is assigned according to the USB standard. A conventional USB cable or
memory stick can be connected to the port depending on the application. If required, a USB A/B cable
can be purchased from ACD Elektronik GmbH as an optional accessory.

The RJ45 port is the Ethernet interface (10/100 Mbit). The docking station can be connected to a LAN
here. If required, an Ethernet cable can be purchased from ACD Elektronik GmbH as an optional
accessory.
M260SE_Set_Kurzübersicht_Brief Overview_V1.22_de_en.DOC
~ 100 – 240 V AC; 1.0 A max. 50 – 60 Hz
15 V DC; 2.4 A
27 / 35