ACD GRUPPE M260SE Set Kurzübersicht Seite 21

Never position the mobile terminal, docking station or power
supply unit in close proximity to heat sources (heating fans or
similar equipment) and never expose it to direct sunlight,
excessive dust sources or shocks. Ensure that the connection
cables or power supply units do not pose a risk of tripping.
The maximum allowed ambient temperatures for the M260SE Set
ATTENTION
are listed below.
Operating temperature:
Storage temperature:
Only operate the touchscreen using the fingertips or with the
intended touch-pen. Never use a pen or other sharp objects.
ATTENTION
The touch-pen may only be used to operate the touchscreen. It
may not be used for anything else. Please be aware that the touch-
pen presents a potential injury risk.
ATTENTION
Please consult a doctor or the manufacturer of the medical devices
before using the mobile terminal and the associated components
in the vicinity of medical devices (e.g. pacemakers).
ATTENTION
Do not use the mobile terminal in explosive areas.
ATTENTION
The mobile terminal, the docking station, the power supply units
as well as any connection cables must be examined for damage
prior to use. Damaged parts must be replaced. In order to do so,
please contact ACD Elektronik GmbH.
ATTENTION
Unintended use of the interfaces is not permitted.
ATTENTION
In order to prevent overheating, do not cover the mobile terminal,
docking station or the power supply unit when in use.
ATTENTION
The following note applies to the device M260SE/2D-Longrange
Scanner:

This is a Class A device (EN55032). This device can cause radio
interferences in living areas.
NOTE
In this case, the operator may be requested to implement
appropriate measures.
M260SE_Set_Kurzübersicht_Brief Overview_V1.22_de_en.DOC
0 °C – 40 °C/32 °F – 104 °F
-20 °C – 70 °C/-4 °F – 158 °F
(without battery)
21 / 35