®
InPro
7250 Series
Notes:
– The sensors of the InPro 7250 Series are marked with
Warning!
Incorrect O-ring position or a damaged O-ring could
result in process leakage, causing injury to personnel.
Recommended
Not recommended!
Air entrapment
Figure 3:
Installation examples of the InPro7250 sensor
© 09/08 Mettler-Toledo AG
Printed in Switzerland
an arrow, which indicates the flat (upstream) face of
the sensor, for correct installation in a pipe or a tank.
The marking is at the upper end of the sensor moun-
ting thread (see Figure 2).
Solid deposits
CH - 8606 Greifensee
17
52 002 799