Operating Elements And Connections; Important Notes - Monacor SECURITY TVCCD-187HCOL Bedienungsanleitung

1 Operating Elements and Connections

1 Mounting frame for installing the camera on ceilings or walls
2 Camera bracket for fixing the camera to the mounting frame (1)
3 Locking screws of the camera bracket (2): for turning, panning or
tilting the camera, release the corresponding screw and tighten it
again after aligning the camera
4 Locking screw for the sunshield (5)
5 Sunshield
6 Screw cover of the connection jack for the remote control (9)
7 Mini DIN plug for connecting the remote control to the camera
[connection jack below the screw cover (6)]
8 Additional BNC video output (e. g. for connecting a small test
monitor)
9 Remote control with 5 control buttons:
a) SET To activate / deactivate pages of the OSD menu and to
confirm certain menu settings
b) , in the OSD menu: to select menu items
menu not activated: focus setting
c) , in the OSD menu: to change menu settings
menu not activated: zoom setting (
focal length,
10 BNC video output
11 RS-485 interface for remote control of the zoom and focus settings
via a controller
12 Connection plug for the power supply (12 V
13 Adapter for connecting the power source to the power supply plug
(12)

2 Important Notes

The camera corresponds to all required directives of the EU and is
therefore marked with
G
Protect the camera against extreme temperatures (admissible ambi-
ent temperature range -10 °C to +50 °C).
= to increase the focal length)
.
= to reduce the
oder 24 V~)
GB
19