Herunterladen Inhalt Inhalt Diese Seite drucken

Dhcp Configuration; Static Configuration; Pppoe; Lan - Elcon ELCONNECT next BIG 10 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für ELCONNECT next BIG 10:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Warning If the TFTP server address not accessible or the configuration file cannot be re-
trieved, then the device is automatically resetting and restarting. This is done in
cyclical time frames until a configuration could be retrieved successfully.
The management and data path can be configured after configuring the network parameters.
Finally, the DNS server can be assigned either to the management or to the data path.

3.2.1 DHCP Configuration

With the WAN-setting „DHCP", the device retrieves its IP-address from a DHCP server.

3.2.2 Static Configuration

When using the option „Static", IP-address,subnet mask, Gateway and DNS-server need to be
configured manually. The option „Static" can be used in case your Internet has made the re-
quired data available to you. The setting „Static"allows the assignment of fixed IP-addresses
only, whereas DHCP is not supported.
Warning Any changes made on this site have the effect that upon next click upon the button
"Save settings" the BIG 10 will automatically perform a restart.

3.2.3 PPPoE

The setting "PPPoE" allows configuring IP address, net mask, gateway and DNS server using
a central BRAS server. Chose "PPPoE" if your Internet provider made the username and
password available to you. The password must be entered twice in order to avoid wrong en-
tered passwords.
The data for „Service Name" / „Service Concentrator" are optional, if provided by the Internet
provider.
You can select between connection settings "permanent" or "on demand". "On demand" re-
quires a "Maximum Idle Time", the time the connection can stay idle before it will be discon-
nected.
3.3

LAN

The following menus allow configuring the LAN interface of the BIG 10 and the DHCP serv-
er for your local network.
The BIG 10 has a preset IP address for your local network, which can be changed in this
menu. By enabling the built-in DHCP-server, the IP-address can be automatically assigned to
the devices that are linked to the LAN-ports. The IP-address range and the lease time of the IP
address assignment can be changed. The configuration of a domain giving it a domain name is
supported.
48
BIG 10 Router
Version: 2011/01/19

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis