Teach-Out/Reset - eQ-3 MAX Bedienungsanleitung

Press and hold down the Boost button for at least 3 se-
conds. The antenna symbol (
the teach-in time remaining in seconds. The teach-in
time is 30 seconds.
Without a MAX! Cube, the MAX! Radiator Thermo-
stat can only be used in manual mode; it cannot be
switched to automatic operation.
The MAX! Radiator Thermostat can be reset to the ini-
tial state manually. Restoring the initial state deletes all
settings and information about taught-in devices.
Before resetting the MAX! Radiator Thermostat, ple-
ase first delete the device from the local MAX! soft-
ware when using the installation with a MAX! Cube.
• First remove the batteries from the actuator.
• Wait 60 seconds.
• Press and hold down the three buttons (Auto/Manu,
Boost, (
• Re-insert the batteries.
• Once the factory settings have been restored success-
fully, "rES" is displayed.

9. Teach-out/Reset

)) afterwards.
) is displayed, along with
37