eQ-3 MAX Bedienungsanleitung Seite 29

• Mertik Maxitrol
• Watts
• Wingenroth (Wiroflex) R.B.M
• Tiemme
• Jaga
• Siemens
• Idmar
The adapters and extension pins included in the scope of
delivery allow radiator thermostats to be fitted to radiator
valves Danfoss RA, Danfoss RAV and Danfoss RAVL.
Removing the old dial
Rotate the thermostat dial to the maximum value (A) (an-
ti-clockwise). The thermostat dial then no longer presses
against the valve spindle, making it easier to remove.
There are different ways of fixing the position of the ther-
mostat dial:
• Snap-on fastenings: Thermostat dials that have been
attached using this method can be easily released by gi-
ving the lock/union nut a slight turn in the anticlockwise
direction (B). The thermostat dial can then be removed (C).
• Compression fittings: The thermostat dial is held in
place by a mounting ring which is held together with a
screw. Slacken this screw and remove the thermostat
dial from the valve (C).
• Screwed on with a grub screw: Slacken the grub screw
and remove the thermostat dial (C).
29