Remote Screen Indicators; How To Use Basic Functions; Basic Operation; Setting Temperature - Kaisai KCA3U-12 Bedienungsanleitung

Remote Screen Indicators

Information are displayed when the remote controller is power up.
Transmission Indicator
Lights up when remote
sends signal to indoor
unit
TIMER ON display
TIMER OFF display
Silence feature
display
FAN SPEED display
Displays selected fan speed:
1%
Silence
2%-20%
LOW
21%-40%
41%-60%
MED
61%-80%
HIGH
81%-100%
AUTO
This fan speed can not be
adjusted in AUTO or DRY
mode.
Note:
All indicators shown in the figure are for the purpose of clear presentation. But during the actaul
operation, only the relative function signs are shown on the display window.
Breeze Away display
Active clean feature display
Fresh feature display
Sleep mode display
Follow me feature display
Wireless control feature display
Low battery detection display(If flashes)
MODE display
Displays the current
including:
ECO display
Displays when ECO
feature is activated
GEAR display
Displays when GEAR
feature is activated
LOCK display
Displays when LOCK feature
is activated.
Temperature/Timer/Fan speed
display
Displays the set temperature
by default, or fan speed or
timer setting when using
TIMER ON/OFF functions.
Temperature range:
    
16-30 C /60-86 F
o
Horizontal louver
o
(20-28 C/68-82 F)
swing display
(Model dependent)
Vertical louver auto
Timer setting range:
swing display 0-24 hours
TURBO mode display Fan speed setting range:
AU -100%
Not available for
This display is blank when
this unit
operating in FAN mode.
52

How to Use Basic Functions

Basic operation

ATTENTION! Before operation, please
ensure the unit is plugged in and power
is available.
mode,
1
1
3
3
Swing
Boost
COOL Mode
1. Press the MODE button to select COOL
mode.
2. Set your desired temperature using the
TEMP or TEMP
/
o
3. Press FAN button to select the fan speed
o
in a range of AU-100%.
Press the ON/OFF button to start the unit.
4.

SETTING TEMPERATURE

The operating temperature range for units
is 16-30°C (60-86°F)/20-28 C(68-82 F).
You can increase or decrease the set
temperature in 1°C (1°F) increments.
AUTO Mode
In AUTO mode, the unit will automatically select
the COOL, FAN, HEAT or DRY function based on
the set temperature.
1. Press the MODE button to select AUTO.
2. Set your desired temperature using the TEMP
2
or TEMP
2
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED can't be set in AUTO mode.
Clean
1
1
4
4
button.
3
3
53
button.
2
2
Swing
Boost
Clean