Beko CEG7425B Bedienungsanleitung Seite 53

6 Cleaning and maintenance
7. Also rinse out the three
designated openings by filling
in sufficient water to rinse
out any accumulated coffee
residue.
8. Soak the brewing unit from
time to time (with constant
use once a week) for approx. 30
minutes in hot water and a mild
detergent. Shake the brewing
unit lightly under water, then
rinse all openings using a
strong flow of water.
9. Dry the brewing unit.
Fully Automatic Coffee Maker / User Manual
10. Replace the brewing unit
by turning it into the right
position (the outlet tube facing
downwards and to the front),
insert the brewing unit into
the guide grooves and push
it completely into the coffee
machine.
11. Push the coffee grounds
container
appliance and push the outlet
unit into the upper position.
Close the door.
After switching on,
the brewing unit is
adjusted
normal
C
process starts. During
preparation of the first
coffee after cleaning,
an increased amount
of water runs into the
waste container.
back into the
and the
heating
53 / EN