Running The Cleaning Program; In Case Of Power - Beko CEG7425B Bedienungsanleitung

6 Cleaning and maintenance
6.9 Running the
cleaning program
The cleaning program enables
intensive cleaning of otherwise
inaccessible areas. The cleaning
program must be started when the
following symbol appears on the
display:
The cleaning process
C
takes approx. 8
minutes and should
not be interrupted.

In case of power

C
failure during the
cleaning program, it
has to be restarted.
Before running the
cleaning
C
the metal sieves in
the brewing unit
must be clean and
wiped dry.
54 / EN
The cleaning water is collected in
the drip tray. Alternatively, you can
place a receptacle (>350 ml) under
the spout. Only empty the recep-
tacle when the coffee machine
indicates that the drip tray must
emptied.
A
program,
To run the cleaning program proceed
as follows:
Fully Automatic Coffee Maker / User Manual
CAUTION: Damage
to the coffee machine
and remnants left in
the water by use of
the wrong cleaner!
Use only provided
Beko cleaning tablets
within warranty pe-
riod. After 2 years of
use or after provided
tablets are finished,
use only proper clean-
ing tablets with same
size and chemical sub-
stance. If other clean-
ing solutions are used,
Beko assumes no li-
ability for any damage
caused.