Changing And Storing The Cup Filling Level In Bean Mode - Beko CEG7425B Bedienungsanleitung

5 Operation and use
Remember that in
two cup mode, two
brewing operations
are implemented
in sequence and
correspondingly,
C
if a pot is selected
for four/eight cup
mode, 4 or 8 brewing
operations are
implemented.
remove the cups or
pot when all brewing
operations are
finished.
During
preparation,
coffee powder is
C
moistened with a
small amount of water
first for prebrewing.
The actual brewing
process takes place
after a short pause.
30 / EN
C
Only
coffee
5.11 Changing and
the
storing the cup filling
level in bean mode
The coffee machine is set for
standard quantities by default.
However, you can set the cup filling
level individually for each cup size.
Proceed as follows:
Fully Automatic Coffee Maker / User Manual
You can stop
coffee dispensing
prematurely by briefly
pressing " " (button
6). In the case of
strongly uneven or
only one-sided cup
filling during 2-cup
operation, check
whether one or both
coffee dispensing
spouts are blocked on
the inside by foreign
bodies (coffee bean
or similar).