Beko CEG7425B Bedienungsanleitung Seite 42

5 Operation and use
5.18 Setting
the water tank
illumination
1. In order to set the water tank
illumination, proceed as follows:
Switch to the menu function
by simultaneously
buttons 2 and 3 for approx. 3
seconds. The function displays
of the menu will flash first in a
blinking line, then the current
settings will be displayed.
2 3
2. Then press key 2 repeatedly
until the required illumination
is set.
2
42 / EN
The image below shows the
displays for the 2 possible settings.
pressing
3. Save the entries and quit the
menu by confirming with "
(button 6). All function displays
of the menu flash for approx.
3 seconds to confirm. The
appliance then returns to the
normal operating mode.
Fully Automatic Coffee Maker / User Manual
Illumination off Illumination
on
"
6