Herunterladen Inhalt Inhalt Diese Seite drucken

Beurer BM 26 Gebrauchsanweisung Seite 20

Vorschau ausblenden Andere Handbücher für BM 26:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Insert the cuff tubing into the socket
for the cuff attachment.
This cuff is suitable for you if the in­
dex mark (
) is within the OK range
after fitting the cuff on the upper arm.
If the measurement is performed on the right upper arm,
the line should be located on the inside of your elbow. En­
sure that your arm is not pressing on the line.
Blood pressure may vary between the right and left arm, which
may mean that the measured blood pressure values are differ­
ent. Always perform the measurement on the same arm.
If the values between the two arms are significantly different,
please consult your doctor to determine which arm should be
used for the measurement.
Important: The instrument should only be operated with the
original cuff. The cuff is suitable for an arm circumference of
22 to 35 cm.
A larger cuff for upper arm circumferences from 30 to 42 cm is
available from retailers or the service address under order no.
162.973.
Correct posture
• Rest for approx. 5 minutes before each measurement. Other­
wise there may be divergences.
• You can perform the measurement either sitting or lying down.
Always make sure that the cuff is on a level with your heart.
• To carry out a blood pressure measurement, make sure you
are sitting comfortably with your arms and back leaning on
something. Do not cross your legs. Place your feet flat on
the ground.
• In order not to distort the result, it is important to keep still
during the measurement and not talk.
Select memory
Press the SET button. Select the desired storage space by
pressing the -/+ function buttons. You have 4 memories with
30 spaces each to store the measurements of 4 different peo­
ple separately or to separate measurements taken in the morn­
ing and at night. Confirm your selection with the button
Measuring blood pressure
• Put on the cuff as described previously and assume the po­
sition in which you want to carry out the measurement.
• Start the measurement by holding the button
checking the display, during which all numbers light up, the
cuff pumps up automatically. Whilst the cuff is pumping up,
20
.
. After

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis