2.7
Read/write Encoder 1 (Ec.38)
With Ec.38 the parameter are read/write from/to the encoder.
Bit Value Function
0
1
1
2
2
4
At F5-S bit 2 is default-moderately set, not at F5-M and F5-G. Thus at F5-S encoder data are
reading out after default loading.
Reading out of the parameters. Then the parameter is reset.
Storing of the parameters in the encoder (only with supervisor-password and
in nOP status)
Automatic reading out of the parameters when connecting a new encoder
(loading after acknowledgement with Ec.0 and default values)
9