Selecting The Usb-Hid Mode - G&D DP1.2-Vision-Fiber Installation Und Bedienung

1. In the menu, click on
2. Click on the KVM extender you want to configure and then click
on Configuration
3. Click on the tab
4. When using a multi-channel device, click on the desired video channel and
then click on
5. Select one of the options given under
Disabled
CPU > monitor
Bidirectional
6. Click on Save

Selecting the USB-HID mode

The KVM extender supports various USB input devices. You can use the special fea-
tures of a particular USB input device after selecting the specific USB keyboard
mode.
As an alternative to the specific USB keyboard modes, you can also use the
HID mode. In this mode, data of the USB device connected to the top
socket of the user module is transmitted to the computer module without being
altered.
IMPORTANT: The generic HID
ever, being able to operate particular HID device in generic HID mode can not be
guaranteed.
IMPORTANT: When connecting a USB hub or a USB composite device, which
contains multiple USB devices, only the first of the connected HID devices can be
used in mode.
generic HID
.
KVM extender
.
.
Video channels
Configuration .
 The transmission of DDC/CI signals is disabled (default).
 The transmission of DDC/CI signals is carried out
exclusively from the CPU to the monitor
 The transmission of DDC/CI signals is carried out by
bidirectionally.
.
mode supports many available HID device. How-
:
DDC/CI monitor
G&D DP1.2-Vision-Fiber · 44
Configuration
generic
Keyb./Mouse