Changing The Position Of The Information Dispaly; Changing The Position Of The On-Screen Display - G&D DP1.2-Vision-Fiber Installation Und Bedienung

Configuration

Changing the position of the information dispaly

In the default configuration, the information display is shown at the left upper cor-
ner of the console monitor. However, you can adjust the position to your liking.
How to change the position of the information display:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Select the row
The message on the right is shown at the current
position of the information display.
5. Use the
arrow keys
menu to the desired position or press
6. Press to save your settings or
F2

Changing the position of the on-screen display

By default, the on-screen display is shown at the centre of the console monitor. You
can adjust the position to your liking.
How to change the position of the on-screen displays:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Select the row
5. Use the arrow keys
desired position or press
6. Press to save your settings or
F2
55 · G&D DP1.2-Vision-Fiber
(default) to open the on-screen display.
Console setup and press
Personal Pprofile and press
and press
Set display position
or the mouse to move the
Esc
(default) to open the on-screen display.
Console setup and press
Personal Pprofile and press
Set menu position and press
or the mouse to move the on-screen display to the
Ctrl+D to reset the default position.
Esc
Enter .
Enter .
.
Enter
+
Display position
F2: Save
to reset the default position..
Ctrl+D
to cancel the process.
Enter .
Enter .
Enter .
to cancel the process.