G&D DP1.2-Vision-Fiber Installation Und Bedienung Seite 117

How to select the video mode of a console:
1. Press Ctrl+Num
2. Select the row
mode for the remote console (at the
Select the row
video mode for the local console (at the
3. Under Video mode
always on  image is always on (default)
switch off  switch off image for actions at the other console
4. Press F2 to save your settings.
1. In the menu, click on
2. Click on the KVM extender you want to configure and then click
on
Configuration
3. Click on the tab
4. Click on the tab
the local workstation (on the
Click on the tab
the remote workstation (on the
5. In the field
Image display
 (default)
always on
 off for actions at remote/local console
6. Click on
Save
Related topics:
 Changing the time span of the input lock on page 35
 Right for exclusive access to the console on page 36
(default) to open the on-screen display.
and press
Console setup
Local console setup and press
press F8 to select one of the following options:
.
KVM extender
.
.
General
CPU if you want to configure the video operating mode of
module).
CPU
if you want to configure the video operating mode of
CON
CON
, select one of the following options:
.
if you want to adjust the video
Enter
CON module).
Enter if you want to adjust the
CPU module).
module).
G&D DP1.2-Vision-Fiber · 38
Configuration