Meaning Of The Leds On The Back Panel - G&D DP1.2-Vision-Fiber Installation Und Bedienung

Meaning of the LEDs on the back panel

Area LED
Transmission yellow
green
USB 2.0 Trans. yellow
green
Status Meaning
on Communication with the remote station has been
successfully established.
blinking Only the RX interface can be used to establish a
connection to the remote station.
Check the cable connection of the Tx interface
with the remote station.
fast incompatible SFP module
blinking
off The connection to the opposite site could not be
established.
on Logged on at opposite site
off Not logged on at opposite site
on No established connection to USB host
blinking Power save mode
off No connection to USB host
on Link established
off No link
Status LEDs
G&D DP1.2-Vision-Fiber · 60