Accessories - Chamberlain LiftMaster Professional SGO800 Anleitungen

ASSEMBLY OF TOOTHED RACK
After the motor and gear unit has been mounted, the rack rail
can be mounted on the gate. The simplest and fastest
method of mounting the rack rail is to use self-tapping and
self-cutting steel screws
Please take care to ensure that the mounting screws
are placed in the middle of the long holes on the mounting
holder, so that the position of the rack rail can be
corrected later.
NB: The simplest way of mounting the rack rail
is to place it on the drive cogwheel of the
motor, unlock the motor, and push the gate
gradually open with the rack rail on it, screwing in the
screws one by one in the process. This will ensure
optimum meshing of the rack rail with the cogwheel.
UNCOUPLING OF DRIVE
A lockable uncoupling device is provided so that the gate can
be opened by hand in case of a power failure. The
uncoupling process is shown in Illustration 5. A claw
coupling releases the connection between the cogwheel and
the worm gear.
ASSEMBLY OF LIMIT-SWITCH BRACKETS
The drive should be uncoupled before this part of the
assembly work is carried out. Slide the gate into the closed
position. Mount the limit switch bracket such that the roller of
the switch is situated approximately in the middle of the
bracket. Repeat this process for the open position. The
bracket should be mounted with screws (Illustration 6).
OPERATION
The sliding gate actuator can be operated by the remote
control. After disengaging the drive coupling using the key
provided, the gate can be operated manually.
Various operation modes can be preset by changing the dip
switches on the electronic control.
709155
4
5
6
© Chamberlain GmbH, 2000
7

ACCESSORIES

(1) Model FLA230-2 Flashing Light
(2) Model 100263 Infrared barrier
(3) Model 100027 1-Function Keyswitch,
surface mount
(Flush mount - 100010)
Model 100041 2-Function Keyswitch,
surface mount
(Flush mount - 100034)
(4) Model 760E Outside Keylock
(5) Model 600046 2.5 Safety Edge Set (Small)
(6) Model 600053 20m Bulk Pack Safety Edge Profile
(Small)
(7) Model 600060 Assembly Pack Safety Edge
(Small)
(8) Model 600152 Assembly Pack Safety Edge
(Medium/Large)
(9) Model 600077 Bulk pack (not shown)
(10)Model 600145 20m Bulk Pack Safety Edge Profile
(Large) (not shown)
(11) Model 600138 20m Bulk Pack Safety Edge Profile
(Medium) (not shown)
(12)Model 600176 1m Safety Edge Profile (Large)
(not shown)
(13)Model 600169 1m Safety Edge Profile (Medium)
(not shown)
(14)Model 600008 IR Sensor Stand - 530mm
(15)Model 600015 Key Switch Stand - 1100mm
(16)Model 320001 Rack 1m