Resetting The Telephone To The Factory Settings; Important Notice - HumanTechnik freeTEL III Bedienungsanleitung

• Connect another telephone to your line. If it works, this would mean that your telepho-
ne is probably faulty.
Warning tone during a call
• The batteries are virtually empty.
- Place the handset onto the charger.
• The telephone's range has been exceeded.
- Take the handset closer to the base station.
Telephone number is not displayed
• The caller display must be supported by your telephone operator.
• The caller display function doesn't work if the telephone is connected to an extension.

Resetting the telephone to the factory settings

Procedure for resetting the telephone to the ex-factory status:
1. Press (left softkey).
Menu
2. Now use the keypad to enter the following code: "4,6,1,5,3,0,5".
?
3. appears on the display.
4. Press (left softkey). "Please wait" appears on the display.
OK
5. After about 2 seconds,
start menu. Now the telephone has been reset to the default settings.

Important Notice

This product is not protected against splash water. Do not place any containers filled with
water, such as flower vases on or near the product. Also, do not place anything with an
open flame near it.
appears on the display and the »freeTEL III« returns to the
English 33