General; Start Remote Control; Listen To Messages And Manage - HumanTechnik freeTEL III Bedienungsanleitung

Answering machine on the go (remote control)

General

You can retrieve messages from the answering machine from any other phone (e.g. hotel,
telephone booth).
The following conditions must be met:
1. You have set a remote query PIN other than 0000 (refer to set remote query PIN,
page: 20)
2. The phone used for the remote query is tone dial enabled (DTMF), i.e. when press-
ing a key you hear different tones.

Start remote control

Dial your own number.
1 2 3
4 5 6
7 8 9
* 0
"PIN" Once you hear your message text: enter remote query PIN via the keypad.
1 2 3
4 5 6
7 8 9
* 0
You will hear a signal tone to confirm your entry.
Now you can operate the answering machine via the keypad of the other telephone.
Note:
If you have entered the wrong remote query PIN, the call is terminated.

Listen to messages and manage

Play back recorded messages
For pause
For re-recording
Repeat current message
Repeat last played message
Skip current message
Delete current message
Terminate playback of current message
22 English
Press key
Press key
Press key again
Press key
Press key 2x
Press key
Press key
Press key