Couple Bluetooth ® Devices; Connecting Special Accessories; Troubleshooting - HumanTechnik freeTEL III Bedienungsanleitung

Couple Bluetooth
You have the possibility to connect your »freeTEL III« via the Bluetooth
Bluetooth headset or other Bluetooth
®
Press (left softkey)
Menu
Press (left softkey)
OK
Press (left softkey)
OK
Activate your Bluetooth® enabled device and set it in coupling mode (see user manual
of the Bluetooth
If the connection between »freeTEL III« and Bluetooth
successfully,
Note:
The Bluetooth function has to be activated that other Bluetooth
®
connected to your »freeTEL III«.

Connecting special accessories

The »freeTEL III« possesses:
- Standard headset port with a 2.5 mm socket (for connecting a headset, for
instance).
- Standard headphone port with a 3.5 mm socket (for connecting a headphone, for
instance).
The following special accessories can be connected to the base station:
- Vibrating pillow
- Flash module

Troubleshooting

General
• Make sure that the telephone cable is undamaged and correctly inserted. Disconnect
any other accessories – extension cable and other telephones. If the telephone works
afterwards, this indicates that the fault is caused by another device.
• Make sure that the power cord is attached to the base station and plugged in correctly.
• Check if the batteries are charged.
• Try connecting the telephone in a neighbour's house, for example. If the device works
there, this indicates that your phone line may be faulty. Contact your telephone
providers' help line.
32 English
devices
®
Bluetooth
BT Pairing
enabled device)
®
will be shown on the display.
- Switch module
- Acoustic module
enabled devices.
®
connection with a
®
enabled device was established
®
enabled devices can be
®