Register Other Handsets; Deleting A Handset From The Base Station; Dial Pause Setup - HumanTechnik freeTEL III Bedienungsanleitung

Register other handsets

Mobile sets of other GAP enabled devices can be registered as follows:
At the mobile set: Start the registration of the mobile set following the respective user
manual.
At the base: Press registration/paging
release the button again. The LED top right at the base station blinks during the search
mode of the base station.
If you are asked to enter a RC code, kindly enter "1111" as registration code.

Deleting a handset from the base station

Should you wish to deregister a mobile set from the base station, proceed as follows:
Press (left softkey)
Menu
Press (left softkey)
OK
Press (left softkey)
OK
Press (left softkey)
OK
?
appears on the display.
Press (left softkey)
OK
After a short while the handset returns to the start menu and is now de-registered
from the base.

Dial pause setup

In order to get an exchange line on a telephone system, you can insert a dial pause after
the first digit. The pause can be set between 1 and 6 seconds.
Press (left softkey)
Menu
Press (left softkey)
OK
Press (left softkey)
OK
Press (left softkey)
OK
Use the
Press (left softkey) to save your settings.
OK
Note:
Press (right softkey) to return to the menu list.
Back
28 English
Setup
Registration
Delete
Setup
Network
Pause
buttons to select the desired dial pause (1 to 6 seconds).
button at the base station for five seconds and