Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Flash time setup (Inquiry button)
This function is required in order to activate certain T-Net features. If you operate your
device on a telephone system, you may have to change the flash time (see the operating
manual for the telephone system).
Press
(left softkey)
Menu
Press
(left softkey)
OK
Press
(left softkey)
OK
Press
(left softkey)
OK
Use the
Press
(left softkey) to save your settings.
OK
Note:
Press
(right softkey) to return to the menu list.
Back
Note:
The flash time can be set to the following times: 90/270/600 ms. Fixed setting standard
90 ms.
Dial mode setup
Press
(left softkey)
Menu
Press
(left softkey)
OK
Press
(left softkey)
OK
Press
(left softkey)
OK
Use the
Press
(left softkey) to save your settings.
OK
Note:
Press
(right softkey) to return to the menu list.
Back
Note:
Nowadays, most telephone lines use tone dialing.
Key lock
To prevent that you might accidentally make a call, you can activate a key lock. When acti-
vated, all key functions are disabled and therefore the phone is protected from accidental
use e.g. by children. To activate the key lock, proceed as follows:
1. Press down and hold the
2. To reactivate the keys, press down and hold the
in the display. The key pad will be activated once again.
Setup
Network
Recall
buttons to select the desired flash time.
Setup
Network
Dial mode
buttons to select the desired dial mode (Tone or Pulse)
button until the
icon appears in the display.
button until the
icon disappears
English 29
Werbung
Kapitel
Inhaltsverzeichnis
