Choosing The Display Language - bürkert 8025 Kurzanleitung

Type 8025/8035 /
Installation and commissioning
9.5.

choosing the display language

When the device is energized for the first time, the display language
is English.
LANGUAGE
0......9
UNit
Fig. 49: Diagram of the "LANGUAGE" parameter of the
Parameters menu
→
If you do not want to adjust another parameter, go to the "END"
parameter of the Parameters menu and press
settings and go back to the Process level.
ENGLiSh
→
the chosen lan-
DEUtSCh guage is active
as soon as the
ENTER key is
FRANçAiS
pressed.
itALiANO
ENTER
to save the
9.6. entering the k factor of the fitting
used
The device determines the flow rate in the pipe using the fitting K
factor.
The K factor of the fitting used can be entered here.
The K factor of the fitting used is in the operating instruc-
tions of the fitting.
The operating instructions of the Bürkert fittings can be
found on the CD delivered with the device or on the internet
at: www.burkert.com.
English
53