Single Satellite Search; Multi Satellite Search; Tp List; Other - Medion MD 24285 Anleitung

DiSEqC 1.0
If you operate a satellite system with several LNBs, set the relevant LNB
here. Please refer to the instructions for the satellite system to do so.
22K
If you have selected a special LNB type in the previous menu option, you
can activate or deactivate the function here.
The "Universal" LNB type is activated automatically.
Polarity
In this menu option you can select the polarisation of the satellite. Select
from the options H (Horizontal), V (Vertical) and Auto (Automatic).

Single Satellite Search

Please refer to the instructions on Page 31.

Multi Satellite Search

The function of the multi-satellite search is similar to the individual satellite
search but here all of the satellites saved in the satellite list are searched in
one run.

TP list

Please refer to the instructions on Page 31.

Other

In this menu option you will find other setting options that are not part of
the normal range.

LNB Power

Switch the LNB's power supply on or off. The factory configuration is the
power supply switched on.
If there is a short circuit on the aerial line the receiver switches the
LNB supply off. This must then be switched back on again manually.
35