Antenna Setup - Medion MD 24285 Anleitung


Antenna Connection
If your satellite aerial has a motorised LNB use the "  " and "  " buttons to
Motor Antenna
select the "
For all other LNB types the "
Satellite List
In this menu you will find a list of all saved satellites and you can set here
which satellites are to be included in the search.
Use the "  " and "  " arrow keys to select the desired satellite and confirm
your selection with the "
If you want to add other satellites, repeat the process.
You open the editing mode with the red "
change the satellite's name.
In order to add a new satellite to the list open the menu with the green
TEXT
button. Enter here the name and longitude of the satellite.
RCL
Use the blue "

Antenna Setup

You can set the reception parameters here, e.g. the settings to control up
to 4 satellites for a motorised satellite aerial.
Caution!
Only change the settings in this menu if you have the
required specialist knowledge. If in doubt please refer to a
specialist workshop.
Satellite
In this menu option select the satellite whose settings you want to change.
LNB Freq
In this menu option you determine the settings for your LNB types; the
factory sets the setting to "
works for most common LNBs.
Transponder
In this menu option you can select individual transponders for a satellite.
34
" option.
F i x ed A n te n na
OK
" button.
" button to delete the selected satellite.
U n i ve r s al ( 9 7 50 - 10 60 0 )
" option applies.
SAT
" button and can then
". This setting