Help In Case Of Problems - Medion MD 24285 Anleitung

Help in case of problems

Symptom
No message in the
display
No sound or image,
the time indicator is lit
on the screen.
No sound or image,
poor image
No or only a weak
signal.
The TV does not
display any images.
The remote control is
not working.
For all other difficulties please refer to our service centre.
Possible cause/solutions
The power cable is not connected.
Connect the power cable to the mains socket.
The receiver is in standby mode.
Press the button. The receiver switches itself on
and the channel is displayed on the TV screen.
The aerial is not aligned to the satellite.
Re-align the aerial. Observe the instructions in the
satellite aerial's operating instructions.
The LNB is defective. Replace the LNB.
Check the cable connecting the LNB to the receiver
and the receiver to the connected devices.
The system is not connected properly.
Check the connection to the SCART or HF cable.
The TV is not in AV mode.
Switch the TV to the appropriate AV input.
The batteries are dead.
Replace the batteries.
The remote control is pointing in the wrong
direction.
Direct the remote control to the front of the receiver
and ensure that nothing is between the remote
control and receiver.
45